This is a BRAND NEW 2004 -2009 and 2012-2013 Yamaha YFZ450 carb carburetor FCR 39mm flat slide Also includes a 10 piece jetting kit, with mains: 165, 170, 175, 180, 185 and pilots: 45, 50, 52, 55, and 58 Ready to install on a 2004 20052006 2007 2008 2009 2012 2013 YFZ450, 04 05 06 07 08 09 12 13 ...

This is a set of BRAND NEW carburetor hoses from Vito's Performance These will fit any year Yamaha Banshee 1987-2006 This kit includes all the hoses you need, from the gas tank, all the way to the overflow drains These are a clear translucent blue color, very sharp, and flexible, and will not ...

This is a set of BRAND NEW Vito's Performance T.O.R.S. system removal carb caps + idle screws Works on the stock Mikuni carburetors, are removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Banshee 1987-2006 With these aftermarket

This is a set of BRAND NEW carburetor hoses from Vito's Performance These will fit any year Yamaha Banshee 1987-2006 This kit includes all the hoses you need, from the gas tank, all the way to the overflow drains These are a clear translucent blue color, very sharp, and flexible, and will not ...

This is a set of BRAND NEW Vito's Performance T.O.R.S. system removal carb caps Works on the stock Mikuni carburetor, it removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Blaster 1988-2006 With these aftermarket carb caps the carb ...

This is a set of BRAND NEW Vito's Performance T.O.R.S. system removal carb caps Works on the stock Mikuni carburetors, are removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Banshee 1987-2006 With these aftermarket carb caps the carb

This is a set of BRAND NEW carburetor hoses from Vito's Performance These will fit any year Yamaha Blaster 1988-2006 This kit includes all the hoses you need, from the gas tank, all the way to the overflow drain These are a clear translucent blue color, very sharp, and flexible, and will not break ...

This is a PAIR of BRAND NEW 28mm PWK style carb w/ vent lines Perfect for a Yamaha Banshee This kit includes a Vito's Performance thumb throttle cable as well The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a brand new VITO'S PERFORMANCE carburetor carb top cable adjuster This is the piece that screws into the cap on top of the factory stock OEM carb on the TORS delete kit, it adjusts the cable Fits all Yamaha Blaster 200 and Banshee 350 ATVS (Banshees will have to order 2 for a full ...

This is a brand new Carburetor side cover plate with screws and o-rings. This is the cover on the side of the carburetor also fits: 2001 - 2005 Raptor 660 2002 - 2008 Grizzly 660 2008 - current Raptor 250 2004 - current Raptor 350 2011 - current Raptor 125 Replaces these OEM Yamaha part numbers: ...

This is a pair of (2) Banshee carburetor rubber boot clamps These are genuine Yamaha OEM factory parts! New in packaging These are the clamps that connect the carbs to the intake boots on the cylinder Its ready to install on ANY year Yamaha Banshee 1987-2006 (also fits Blaster ...

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable UNI brand 2 stage clamp on filter The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a BRAND NEW kit that includes: 34mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a Banshee carburetor rubber boot clamp These are genuine Yamaha OEM factory parts! New in packaging These are the clamps that connect the carbs to the intake boots on the cylinder Its ready to install on ANY year Yamaha Banshee 1987-2006 (also fits Blaster ...

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable UNI brand 2 stage clamp on filter JET kit including 10 different main jets (150, 152, 155, 158, 160, 162, 165, 168, 170, 172) The carb is not a Keihin brand carburetor, but it uses ...

This is a BRAND NEW 28mm PWK style carb w/ vent lines The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a PAIR of BRAND NEW 34mm PWK style carb w/ vent lines Perfect for a Yamaha Banshee This kit includes a Vito's Performance thumb throttle cable as well The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a PAIR of BRAND NEW 28mm PWK style carb w/ vent lines Perfect for a Yamaha Banshee (cable not included, please see our other auction for a kit with cable and/or K&N filters) The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a PAIR of BRAND NEW 34mm PWK style carb w/ vent lines Perfect for a Yamaha Banshee This kit does not include the throttle cable, but see our other listings for a kit with the thumb cable, and the K&N filters The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a PAIR of BRAND NEW 34mm PWK style carb w/ vent lines Perfect for a Yamaha Banshee This kit includes a pair of K&N style reusable air filters This kit also includes a Vito's Performance thumb throttle cable The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable This carb has the multi-color TITANIUM look to it Also has the upgraded billet aluminum choke lever The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a BRAND NEW kit that includes: 34mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable K&N Style reusable air filter The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is a brand new VITO'S PERFORMANCE carburetor carb top cable adjuster This is the piece that screws into the cap on top of the factory stock OEM carb on the TORS delete kit, it adjusts the cable Fits all Yamaha Blaster 200 and Banshee 350 ATVS (Banshees will have to order 2 for a full ...

This is a BRAND NEW 34mm PWK style carb w/ vent lines The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets. ...

This is an OEM factory genuine Kawasaki carburetor boot manifold This fits a 1988-2011 Bayou 220 or 250 This is OEM part number: 14073-1312 ...

This is a PAIR of BRAND NEW 28mm PWK style carb w/ vent lines This carb has the multi-color TITANIUM look to it Also has the upgraded billet aluminum choke lever Perfect for a Yamaha Banshee This fits the OEM stock factory intake boots This kit includes a Vito's Performance thumb throttle ...

Kawasaki Starter / Choke Plunger Kit Replaces OEM Kit: 16016-1101 Kit Includes: Starter Plunger Cap Starter Plunger Plunger Spring Starter Plunger O-Ring Starter Plunger Boot Fits these models: 2001-04 KFX250 MOJAVE 1996-04 BAYOU 300 1996-05 BAYOU 300 4X4 1995-00 LAKOTA 300 2001-03 LAKOTA SPORT ...

UPP1099 Motor City Atv New Banshee Upp Carb Boots For Stock Size Carburetors 2 Tags: This is a set of 2 BRAND NEW UPP Brand intake manifolds for a Yamaha Banshee. The rubber intake boot is for stock carbs, 26-28mm , including Mikuni & Keihin This setup is designed to clear the clutch arm These ...

This is a BRAND NEW Vito's Performance Yamaha Blaster carb rebuilt kit This includes everything to completely rebuild your 26mm Mikuni stock OEM carb Includes the exact items seen in the photos: bowl gasket, main jet, needle jet, seat, needle, orings, clips, springs, etc These will fit any year ...

This is a BRAND NEW Vito's Performance Yamaha Banshee carb rebuilt kit This includes everything to completely rebuild your Banshee 26mm Mikuni stock OEM carb Includes the exact items seen in the photos: bowl gasket, main jet, needle jet, seat, needle, orings, clips, springs, etc This will do TWO ...

This is a BRAND NEW carb choke lever from Vito's Performance Replaces OEM Part # 2GU-14171-00-00 This will only fit the Mikuni OEM factory stock carb, will not work for Keihin PWK carbs These will fit any year Yamaha Banshee or Blaster ...

This is a BRAND NEW Vito's Performance Yamaha YFZ450 carb rebuilt kit This includes everything to completely rebuild your stock carb Includes the exact items seen in the photos: bowl gasket, size 155 main jet, 48 pilot jet, needle jet, seat, needle, bowl oring, etc These will fit any year Yamaha ...

This is a BRAND NEW Vito's Performance Yamaha Banshee carb rebuilt kit This includes everything to completely rebuild you Banshee 26mm Mikuni stock OEM carb Includes the exact items seen in the photos: bowl gasket, size 200 main jet, needle jet, seat, needle, orings, clips, springs, etc This will ...

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 28mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 28 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a brand-new carb for your PW50 Zinger bike This is a genuine OEM factory Yamaha part from our local dealership OEM: 5PG-14101-11-00 In stock, ready to ship from Michigan, USA Fits 2007-2024 (current) PW50 ...

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 28mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 28 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike ...

This is a BRAND NEW Yamaha Blaster aftermarket larger carb 35mm kit Kit includes: 1 x 35mm Carb 1 x Vito's Performance thumb throttle cable 1 x K&N Style filter and clamp 1 x Outerwear pre filter 1 x JET kit with 10 different main jets (150, 152, 155, 158, 160, 162, 165, 168, 170, 172) 1 x ...

This is a BRAND NEW Yamaha Blaster 200 aftermarket larger carb 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the regular Keihin ...

This is a BRAND NEW CV40 Carb for all HD Harley Davidson 40mm motorcycles Fits many models, including Dana Electra Glide, Super glide, Fatboy, road King, ETC In stock and ready to ship! Ships very next business day from Michigan ...

This is for 4 gaskets! This is a BRAND NEW intake reed gasket from Vito's Performance Fits any year Yamaha Banshee 1987-2006 and up All direct OEM replacements, at a fraction of the costs: Yamaha 55K-13621-01-00 and 3GG-13621-00-00 87 YAMAHA YZF350 T BANSHEE 88 YAMAHA YZF350 U BANSHEE 89 ...

This is a BRAND NEW fuel bowl o-ring by VITO'S PERFORMANCE These replaces the old one on your Keihin PWK or PJ carb Fits any size 33mm 34mm 35mm 36mm 38mm 39mm 41mm Includes the bowl o-ring ...

This is for 10 gaskets! This is a BRAND NEW intake reed gasket from Vito's Performance Fits any year Yamaha Banshee 1987-2006 and up All direct OEM replacements, at a fraction of the costs: Yamaha 55K-13621-01-00 and ...

This is a Brand NEW Vito's PJ choke plunger lever How many times to you pull your choke up,and it just slams right back down? This will fix your problem! Takes less than a minute to repair Fits ANY Keihin PJ carb models, such as 34 or 36 Comes from the factory on Honda 1985-1999 CR125 1985 CR250 ...

This is a BRAND NEW carb cap, cable adjuster, and o-ring seal by VITO'S PERFORMANCE These replaces the old one on your Keihin PWK carb Fits any size 33mm 34mm 35mm 36mm 38mm 39mm ...