This is a set of 4 pipe springs + 2 exhaust pipe o rings for a Yamaha Banshee These are BLACK in color These are 89mm, and will fit any year Yamaha Banshee 1987-2006 Fits stock and aftermarket exhaust ...

2006-2024 YAMAHA RAPTOR 700 COMP (COMPETITION) SLIP ON Comp Slip On Exhaust Performs Under 102db Includes muffler and midpipe Includes USFS Approved Spark Arrestor 15% Increase in Torque 15% Increase in Horsepower 4.9 lbs. weight savings over stock The words "power" and ...

This is a set of BRAND NEW rear Yamaha Banshee exhaust pipe silencer hanger mounts These are for TOOMEY pipes - fits T5 T6 or any other Toomey silencer These aftermarket unit are made of billet aluminum, and are anodized black These were for holding the rear silencers to the frame of any year ...

This is a set of BRAND NEW front Yamaha Banshee exhaust pipe hanger mounts These aftermarket unit are made of billet aluminum, and are anodized black Comes with all stainless steel mounting hardware, and spacers These were for holding the front expansion chambers (pipes) to the frame of any year ...

This is a BRAND NEW front Yamaha Blaster exhaust pipe hanger mount This aftermarket unit is made of billet aluminum, and is anodized black These were for holding the front expansion chamber (pipe) to the frame of any year Blaster ...

This is a BRAND NEW front Yamaha Blaster exhaust pipe hanger mount This is a new Yamaha OEM factory genuine part These were for holding the front expansion chamber (pipe) to the frame of any year Blaster ...

GOLD SERIES FATTY EXHAUST PIPE With well over 35 years of racing experience behind it, the Fatty Gold Series pipe delivers race proven performance. The Fatty broadens and smooths out the power curve while boosting gains throughout the entire power band, more low-end, more mid, and increased ...

This muffler DOES have a spark arrestor built in GOLD SERIES FATTY EXHAUST PIPE With well over 35 years of racing experience behind it, the Fatty Gold Series pipe delivers race proven performance. The Fatty broadens and smooths out the power curve while boosting gains throughout the entire ...

This is a set of 4 pipe springs + 2 exhaust pipe o rings for a Yamaha Banshee These are STAINLESS STEEL - and will be rust free for a lifetime of use! These have a swivel on one end, so they can flex, and turn. Makes it much easier to install! These are 83mm, and will fit any year Yamaha ...

This is a Yamaha Blaster Exhaust seal gasket from VITO's PERFORMANCE This goes between the cylinder and the exhaust pipe It replaces Yamaha OEM part # 3PA-14613-10 Fits any year 1988 to 2006 Will also fits the models below: RT110 RT180 1992 BLASTER - YFS200D EXHAUST 1992 BLASTER - YFS200D_MN ...

Brand new from Vito's Performance This is silencer exhaust packing designed to replaced your old worn out stuff! Made from high density fiberglass, this quiets down any silencers, and last a very long time! Made from high temperature material, this can resist up to 1228 degrees F There is enough ...

This is a set of 4 exhaust pipe o-rings for a Yamaha Banshee by Vito's Performance These will only fit SHEARER PIPES or Vito's Performance FAT BASTARD These go up inside the exhaust header pipe, right where it mounts to the cylinder These will fit any year Yamaha Banshee 1987-2006 High temp heat ...

This is a set of TWO (2) high temperature exhaust sleeve pipe clamps for a Yamaha Banshee (any year 1987-2006) These are rated up to 500 degrees, and will not melt! These are made with a 3-ply Silicone Elastomer, with a woven polyester fabric vulcanized and cured In English, that means they are ...

This is for 1 high temperature exhaust sleeve pipe clamp for a Yamaha Banshee (any year 1987-2006) These are rated up to 500 degrees, and will not melt! These are made with a 3-ply Silicone Elastomer, with a woven polyester fabric vulcanized and cured In English, that means they are strong, ...

This is a set of 2 exhaust pipe o-rings for a Yamaha Banshee by Vito's Performance These go up inside the exhaust header pipe, right where it mounts to the cylinder These will fit any year Yamaha Banshee 1987-2006 High temp heat rated - these will hold up against the high heat produced from the ...

This is an exhaust shield bolt and washer kit These are the binding screws that hold the heat shield onto the oem factory exhaust fits many models, including Yamaha Banshee Blaster, Warrior, TT500, TW200, and much more THis kit includes 2 bolts and 2 washers ...

This is a set of TWO (2) high temperature exhaust sleeve pipe clamps for a Yamaha Banshee (any year 1987-2006) These are rated up to 500 degrees, and will not melt! These are made with a Silicone Elastomer, with a woven polyester fabric vulcanized and cured In English, that means they are strong, ...

This is a set of BRAND NEW Yamaha Banshee exhaust pipe hanger mounts. These were for holding the expansion chambers (pipes) to the frame of any year Banshee 1987-2006. Brand new from the factory, OEM, original Yamaha parts, in original packaging, ready to use! This is for one PAIR of hangers = ...

This is a Yamaha Blaster 240 BIG BORE top end gasket from VITO's PERFORMANCE Kit includes: A. .020" base gasket. B. Big bore head gasket fits 71mm to 73mm bore sizes. C. Reed gasket. D. Exhaust gasket. Fits any year 1988 to 2006 1992 BLASTER - YFS200D EXHAUST 1992 BLASTER - YFS200D_MN EXHAUST PIPE ...

This is a brand new pair of (2) o-ring from Vito's Performance These o-rings replace the stock one that goes on the head pipes, these the exhaust slides over the cylinders Replaces Yamaha OEM stock # 93210-45742-00 Will fit any year Yamaha Banshee 1987-2006. Also fits: 1987 YFZ350T EXHAUST 1988 ...

DMC has re-designed the Force-4 Twin to utilize a range of quick change ?Power Tune? inserts. These Power Tune inserts are ?Reversion Cones? that can be easily changed in minutes to tune the exhaust system for your specific engine configuration or changing track conditions. In simple terms this ...

The photos show two, but the listing is only for ONE hose clamp - please see our other listings for a discounted matched pair of 2! This is ONE high temperature exhaust sleeve pipe clamp for a Yamaha Banshee (any year 1987-2006) These are rated up to 500 degrees, and will not melt! These are ...

This is a set of NEW Yamaha Banshee OEM factory stock exhaust pipes heat shields These will fit any year Yamaha Banshee 1987-2006. Includes both LEFT and RIGHT, you get both sides NEW OEM factory directly from ...

This is a NEW Yamaha YFZ450 OEM factory stock exhaust pipes heat shield These will fit any year Yamaha YFZ450 2004-2009, 2012-2013 (carb models only, not EFI) NEW OEM factory directly from ...

This is a brand new Yamaha Raptor 250 complete top end gasket kit This is by Vito's Performance includes: Head gasket, base gasket, and exhaust gasket fits every year: 2008 2009 2010 2011 2012 ...

This is a set of NEW Yamaha Banshee OEM factory stock exhaust pipes mid pipes (joints) These will fit any year Yamaha Banshee 1987-2006. Includes both LEFT and RIGHT, you get both sides NEW OEM factory directly from ...

This is a complete BLASTER exhaust for any year Blaster 1988-2006 Includes both the front and the rear pipes GOLD SERIES FATTY EXHAUST PIPE With well over 35 years of racing experience behind it, the Fatty Gold Series pipe delivers race proven performance. The Fatty broadens and smooths ...

This is a set of NEW Yamaha Banshee OEM factory stock exhaust mid pipe joints + heat shields + bolts and washers These will fit any year Yamaha Banshee 1987-2006. Includes both LEFT and RIGHT, you get both ...

Vito's Performance Vito's Performance Exhaust Plug Motorcycle Dirt Bik This is a exhaust muffler plug designed to keep dirt and water out of your pipes when washing and storing your machine! Universal fit designed to fit most ATV dirtbike and motorcycle exhausts from 1.5" to 2.5" in diameter Tapere

CY240 Repair-Sleeve With Triple Exhaust - Fits Vitos Cy240 Cylinder Kit ...

This is a complete BLASTER exhaust for any year Blaster 1988-2006 Includes both the front and the rear pipes This muffler DOES have a spark arrestor built in GOLD SERIES FATTY EXHAUST PIPE With well over 35 years of racing experience behind it, the Fatty Gold Series pipe delivers race ...

This is a BRAND NEW Yamaha Banshee exhaust pipe hanger mount These were for holding the expansion chambers (pipes) to the frame of any year Banshee 1987-2006. Brand new from the factory, OEM, original Yamaha parts, in original packaging, ready to use! This is for one hanger - a Banshee will ...

Cylinder Kit 240 Big Bore With Performance Port Timing -Triple Exhaust-Four Intake Ports-With Forged ...

Exhaust Head Pipe To Cylinder ...

This is a NEW Yamaha YFZ450r OEM factory stock exhaust pipes heat shield These will fit any year Yamaha YFZ450 2009-CURRENT (EFI models only, not carb) NEW OEM factory directly from ...