This is a BRAND NEW Yamaha Banshee upper + lower a-arm bushing replacement kit from Vito's Performance Includes 12 a-arm bushings This kit will replace all bushings in all 4 a-arms Includes enough to do FOUR (4) a-arms - both LEFT and RIGHT, upper and lower: 12 x Bushings Fits: 1987-2006 Banshee ...

This is a BRAND NEW 2004 -2009 and 2012-2013 Yamaha YFZ450 carb carburetor FCR 39mm flat slide Also includes a 10 piece jetting kit, with mains: 165, 170, 175, 180, 185 and pilots: 45, 50, 52, 55, and 58 Ready to install on a 2004 20052006 2007 2008 2009 2012 2013 YFZ450, 04 05 06 07 08 09 12 13 ...

This is set of 4 BRAND NEW mounting bolts for the footpegs of many Yamaha ATVs New, in stock, ready to ship! Will fit: Banshee 350 1987-2006 Blaster 200 1988-2006 YFZ450 YFZ 450 2004-2009 Raptor 660 2001-2005 Raptor 350 2004-2013 Warrior 1988-2004 Wolverine ...

Brand New K&N style ATV Air Filter - fits factory airbox Pleated element style for more air flow More power and acceleration Washable and re-usable ID is 3 7/8" Fits the Yamaha ATV 4 stroke models listed below: 2004 - 2012 Yamaha YFZ450 2009 - Current Yamaha YFZ450R 2010 - 2011 Yamaha YFZ450X This ...

This is a set of BRAND NEW Vito's Performance Easy adjust clutch lever High quality, Forged, lightweight perch is perfect for any application This is also used to remove the emergency brake cable setup on the factory Banshee setup These will fit any year Yamaha Banshee 1987-2006, or any ATV with ...

This is a BRAND NEW Vito's Performance Yamaha YFZ450 carb rebuilt kit This includes everything to completely rebuild your stock carb Includes the exact items seen in the photos: bowl gasket, size 155 main jet, 48 pilot jet, needle jet, seat, needle, bowl oring, etc These will fit any year Yamaha ...

This is a BRAND NEW Vito's Performance front wheel bearing rebuild kit for a Yamaha Banshee, Raptor 700 660 350 250 125, Warrior, YFZ450, YFZ450r, and more! These are the front wheel bearings and seals Kit includes 4 x rear pre-greased sealed bearings, and 4 x dust seals as well ...

This is a BRAND NEW Yamaha Banshee airbox drain plug seal and clamp clip This will fit any year Banshee 1987-2006. Works perfectly, guaranteed to work or your money back. Airbox shown in last photo for reference, it is not included, just the rubber seal and the mounting ...

This is a brand new billet aluminum Yamaha thumb throttle lever assembly by VITO'S PERFORMANCE Ready to install on any year Yamaha Banshee 1987-2006, and it will also fit a Blaster 200,Warrior 350, YFZ450, YFZ450r, Raptor 660, Raptor 700 replaces OEM Yamaha part # 3GG-26250-20-00 & 3GG-26250-00-00 ...

This is a brand NEW Vito's Performance YAMAHA upper and lower lower a-arm mounting bolt ...

This is a BRAND NEW set of 4 wheel studs for a Yamaha ATV sport quad Serrated tapered ends guarantee a good tight snug fit This will fit the front OR the rear of any of the following models Fits YAMAHA: Banshee 350 1987-2006 Raptor 700/700R 2006-2022 YFZ450R 2009-2022 YFZ 450 ...

This is a BRAND NEW Vito's Performance aluminum rear desert style WIDE grab bar. fits Yamaha YFM660r Raptor 660 and YFZ 450 This is the WIDE DESERT style, makes for much easier lifting and moving of the ATV Made from high quality heast treated T6 aluminum Comes with strong corner flag mount for ...

This is a complete NEW valve kit for a Yamaha YFZ450 carb model 2004-2009 Includes 3 intake and 2 exhaust valves, 5 valve springs, 5 valve stem seals, 5 valve lifter caps, and 10 retainer locks Will fit any year 2004-2009 Yamaha YFZ 450 - carb models. Also fits 2004-2005 YZ450 dirtbikes 2003, ...

This is a BRAND NEW steering stem lower bearing holder nut REMOVAL TOOL for a Yamaha Banshee or most Yamaha sport ATVs This easily removed the holder that screws into the frame, to keep the stem bearing in place FITS ANY YEAR OF THE FOLLOWING YAMAHA ATVs: Banshee 350 Big Bear 350 400 Bruin ...

This is a BRAND NEW Yamaha TUNING FORK emblem stick graphic by Vito's Performance This is the part that sticks on the key assembly that mounts onto the bracket on the steering stem, by the handlebars. This will fit any year Banshee, blaster, Warrior, YFZ450, Raptor 350, Raptor 660, and more ...

This is a NEW complete Yamaha YFZ 450 fuel petcock for the gas tank. This item is brand new directly from YAMAHA and an original OEM factory piece. It has never been used and will fit any year 2004-2009 YFZ450 also the 2012 and 2013 It's the selector switch that you can set to ON- OFF or RESERVE. ...

This is a full rebuild kit for ONE Yamaha front hub from Vito's Performance Includes: 1 x inner bearings 1 x outer bearings 1 x inner seals 1 x outer seals 1 x inner spacer 1 x outer spacer 1 x bearing spacer Fits Yamaha: Raptor 700 700r 2006-2024 Raptor 660 660r 2001-2005 ...

This is a pair of BRAND NEW Vito's Performance Yamaha Banshee 350 rear wheel hubs + lugnuts + washers This is for both sides (you get one matched pair) Will also fit a YFZ450r, YFZ450, Raptor 660 700 700r 350 250, or a Warrior axle and bolt pattern. These will also fit a Yamaha Blaster axle, ...

This is a BRAND NEW rear brake return spring This is a genuine OEM factory Yamaha part form our local Yamaha dealership In stock and ready to ship from Michigan USA! This is the return spring that mounts on the rear brake pedal and connects it to the frame for the brakes Yamaha OEM Part ...

This is a new Yamaha YFZ450 engine side crankcase oil squirter upgrade kit Includes the oil squirter and the oring aka "oil mod" OEM oil squirter that will fit 2004-2009 carb model yfz450 atvs You will need your cases modified to fit on a 2004, 2005, or 2006 YFZ 450 A MUST HAVE upgrade for the ...

This is a complete swingarm bearing & seal rebuilt kit for the front of your Yamaha YFZ450 rear swingarm by Vito's Performance All brand new, ready to install in any year, 2004-2009 (carb models), and also 2012 and 2013 You get all 14 required pieces: 4 Needle Bearings 2 Needle Bearing Shafts 4 ...

This is a set of 2 x 2004 -2009 Yamaha YFZ450 rear grab bar bumper fender mounting stay brackets Also fit Yamaha Raptor 660 2002-2005 (won't fit a 2001) 660r - replaces OEM 5LP-21613-10-00 This is for one pair - both left and right are included These are brand new! Ready to install on a 2001 2002 ...

This is a brand new rear taillight / brakelight for a 2004-2005 Yamaha YFZ450 This brake lights up when you press the brake pedal. Come 100% complete with lens, and bulb with wiring plugs. fits: 2002-2005 Raptor 660 2004-2005 YFZ 450 2006-2010 Wolverine 350 2005 Grizzly 660 Replaces Yamaha ...

This is a brand NEW Vito's Performance YAMAHA upper and lower lower a-arm mounting bolt kit This kit has the short and long bolts that hold the left and right bottom a-arms to the frame. This also includes the washers and locking nuts, and dust spacer caps There is enough in this kit do do both ...

This is a BRAND NEW wiring harness for a 2004-2005 Yamaha YFZ450 This is complete, with all the plugs for the headlights, key, brakes, etc Direct replacement for OEM Yamaha part # 5TG-82590-00-00 Ready to install on a 2004 or 2005 YFZ450, 04 or 05 YFZ 450. Will only fit those years, will ...

This ONE rear axle castle nut for any year Yamaha Banshee, Raptor 660, or YFZ450 Brand new from VITO'S PERFORMANCE This is the part that holds the the hubs onto the axle OEM quality, fit, size, and finish, at a fraction of the dealer price Also includes washer Fits: Yamaha Banshee 350cc 1987 - ...

This is a brand new Vito's Performance 20045-2009 YFZ450 fuel air mixture screw This is the EASIEST and quickest way to adjust your fuel/air mixture ratio No tools needed - adjust on the fly, right on the trails or track! This is the upgraded style made of brass! The cheap aluminum style ones are ...

This is a BRAND NEW Yamaha Blaster 200 flywheel degree timing key ...

This is a set of BRAND NEW Vito's Performance thumb throttle cable for a YFZ450 This is for the THUMB throttle setup, and will NOT work for the TWIST setup. Will fit any year carb model yfz 450 2004 - 2009 Replaces Yamaha OEM stock factory parts #: ...

Updated VERSION 2 design, redesigned to be stronger, with a better aluminum alloy that is stronger AND lighter than the originals! The lighter-colored ones that other manufacturers are selling online all come from the same factory, and the aluminum is very weak compared to OEM. We recorded ...

This is a pair of 2 Yamaha Banshee tie rods ends. These go on the end of the tie rods, one one each side (one left hand one right hand). These are brand new aftermarket, with all new hardware, including ball joints, tie rod nuts, mounting nuts, and new rubber boots. Not rebuilt, brand new! In ...

This is a BRAND NEW Yamaha Raptor 660 or Yamaha YFZ450 swingarm pivot bolt, nut, and washer by Vito's Performance This is the bolt that goes through the frame and hold the swing-arm to the frame. It is very common for these to seize up inside the bushing tube Ready to install in any year YFZ 450 ...

This is a genuine VITO'S PERFORMANCE new part! You get one pair of 2 Yamaha OEM front rotors. Ready to install on any year Banshee 1987-2006. They also fit : Banshee 350 - 1987-2006 Raptor 700 - 2006-2018 Raptor 660 - 2001-2005 Warrior 350 - 1988-2005 Blaster 200 - 2003-2006 YFZ450 - 2004-2008 ...

This is a NEW complete Yamaha YFZ 450 fuel petcock knob + screw for the gas tank. This item is brand new, directly from YAMAHA, and an original OEM factory piece. It has never been used, and will fit any year 2004-2009 YFZ450, also the 2012 and 2013 (not EFI) It's the selector knob that you can ...

This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, with Logo and looks very nice! Includes a one way vent hose with billet end cap that only allows gas air to enter the fuel tank to vent, and gas cannot leak out It will fit the following: ...

This is a BRAND NEW steering stem lower bearing kit for a Yamaha Banshee THis rebuilds kit rebuilds the bearing and seals where the steering stem goes into the frame includes: OEM factory bearing OEM upper seal OEM lower seal This is brand new, OEM factory genuine Yamaha parts This will fit any ...

This is a BRAND NEW Yamaha Banshee upper + lower a-arm bushing replacement kit This kits replaces 4 arms total! Fits any Yamaha Banshee 1991-2006 also fits: 2004-2018 YFZ450, YFZ450x 2006-2018 Raptor 700 2008-2013 Raptor 250 2011-2013 Raptor 125 Includes enough to do FOUR (4) a-arms - both LEFT ...

This is a BRAND NEW custom swingarm done by TYSON RACING fits: HONDA 250 250r TRX250 atvs, as well a three wheeler ATC 250r This is the SOLID FRONT style, 1988-1989 style. The 86-87 had a split front, we do sell those in our other listings This model is +12" longer than stock This accepts the ...

Keihin Hex Main ...

Keihin Hex Main ...

Keihin Hex Main ...

Keihin Hex Main ...