This is a set of 4 x BRAND NEW Banshee pipe connector METAL CLAMPS This is what goes in between the head pipes and the silencers. This is an OEM genuine Yamaha factory part They will fit any year Banshee 1987 - 2006. ...

This is a set of 2 BRAND NEW HIGH TEMPERATURE Banshee pipe connectors in ORANGE. This is what goes in-between the head pipes and the silencers. This is an OEM genuine Yamaha factory part They will fit any year Banshee 1987 - 2006. This includes 4 x OEM metal clamps as well

This is a set of TWO (2) high temperature exhaust sleeve pipe clamps for a Yamaha Banshee (any year 1987-2006) These are rated up to 500 degrees, and will not melt! These are made with a Silicone Elastomer, with a woven polyester fabric vulcanized and cured In English, that means they are strong,

This is a BRAND NEW Yamaha Blaster airbox lid snorkel + clamp This is a genuine factory OEM Yamaha product from our local Yamaha dealership Fits any year Yamaha Blaster: 1988-2006 Ready to Install Also includes a Vito's Performance clamp! 

The photos show two, but the listing is only for ONE hose clamp - please see our other listings for a discounted matched pair of 2! This is ONE high temperature exhaust sleeve pipe clamp for a Yamaha Banshee (any year 1987-2006) These are rated up to 500 degrees, and will not melt! These are made

This is a set of TWO (2) high temperature exhaust sleeve pipe clamps for a Yamaha Banshee (any year 1987-2006) These are rated up to 500 degrees, and will not melt! These are made with a Silicone Elastomer, with a woven polyester fabric vulcanized and cured In English, that means they are strong,

This is a BRAND NEW Yamaha Banshee airbox drain plug seal and clamp clip This will fit any year Banshee 1987-2006. Works perfectly, guaranteed to work or your money back. Airbox shown in last photo for reference, it is not included, just the rubber seal and the mounting clip

This is a pair of (2) Banshee carburetor rubber boot clamps These are genuine Yamaha OEM factory parts! New in packaging These are the clamps that connect the carbs to the intake boots on the cylinder Its ready to install on ANY year Yamaha Banshee 1987-2006 (also fits Blaster 1988-2004)

This is a pair of BRAND NEW Yamaha Banshee 350 airbox carb rubber boots + 4 clamps Will fit any year Yamaha Banshee 1987-2006 These go between the air box and the carburetors This listing is for 2 boots, you get both the left and the right These are BRAND NEW

This is for 1 high temperature exhaust sleeve pipe clamp for a Yamaha Banshee (any year 1987-2006) These are rated up to 500 degrees, and will not melt! These are made with a Silicone Elastomer, with a woven polyester fabric vulcanized and cured In English, that means they are strong, flexible, a

This is a BRAND NEW Banshee airbox lid and snorkel This will fit any year Yamaha Banshee 1987-2006. This is a factory OEM unit, brand new in Yamaha packaging Also include the intake mounting clamp, as well as the 4 metal mounting clips

xxx This includes the 2 handlebar clamps and the 4 mounting bolt unlike the competition xxx This is a BRAND NEW Yamaha Banshee steering stem by Vito's Performance One inch taller than the factory stock size (+1") Painted BLACK Will fit any year Banshee 1987-2006 These fit the same 7/8" handle

This is a Banshee carburetor rubber boot clamp These are genuine Yamaha OEM factory parts! New in packaging These are the clamps that connect the carbs to the intake boots on the cylinder Its ready to install on ANY year Yamaha Banshee 1987-2006 (also fits Blaster 1988-2004)

This is a BRAND NEW Yamaha Blaster airbox lid kit This is a genuine factory OEM Yamaha product from our local Yamaha dealership This includes:  OEM Yamaha lid / cover OEM Yamaha snorkel Vito's Performance clamp Fits any year Yamaha Blaster: 1988-2006 Ready to Install

This is a BRAND NEW factory OEM clutch cable holder clamp. This is a OEM Yamaha unit, brand new from local dealership. This mounts on top of the cases, and its what holds the clutch cable to the cases, so it doesn't pop off Ready to install on any year Yamaha Banshee 1987 - 2006. Also fits 1984 1

xxx This includes the 2 handlebar clamps and the 4 mounting bolt unlike the competition xxx This is a BRAND NEW Yamaha Banshee steering stem by Vito's Performance two inches taller than the factory stock size (+2") Painted BLACK Will fit any year Banshee 1987-2006 These fit the same 7/8" ha

xxx This includes the 2 handlebar clamps and the 4 mounting bolt unlike the competition xxx xxx This fits modern 1 1/8" handlebars. The stock Banshee bars were 7/8", but this one is for 1 1/8" handlebars, the modern style used by all sprot ATVs xxx This is a BRAND NEW Yamaha Banshee steering

*** DOES NOT INCLUDE THE BOOTS This is a set of 4 BRAND NEW Yamaha Banshee 350 airbox carb rubber boot clamps Will fit any year Yamaha Banshee 1987-2006 These go between the air box and the carburetors 2 x large clamps 2 x small clamps These attach the boots to the airbox, and the boots

This is a BRAND NEW Yamaha Banshee airbox lid duct SNORKEL clamp This will fit any year Banshee 1987-2006. Works perfectly, guaranteed to work or your money back. Replaces OEM Yamaha part #: 90460-99291-00 or 90460-99291

This is a BRAND NEW Banshee airbox snorkel + clamp This will fit any year Yamaha Banshee 1987-2006. This is a factory OEM unit, brand new in Yamaha packaging

xxx This includes the 2 handlebar clamps and the 4 mounting bolt unlike the competition xxx xxx This fits modern 1 1/8" handlebars. The stock Banshee bars were 7/8", but this one is for 1 1/8" handlebars, the modern style used by all sprot ATVs xxx This is a BRAND NEW Yamaha Banshee ste

*** This includes the 2 handlebar clamps and the 4 mounting bolt unlike the competition *** This is a BRAND NEW Yamaha Banshee steering stem by Vito's Performance Factory stock size (+0") Painted BLACK Will fit any year Banshee 1987-2006 These fit the same 7/8" handlebars as the stock Banshee do

This is ONE (1) brand new K&N filter clamp only! This is the clamp that holds the K&N filter onto the carb The inside diameter is is 2.00" up to 2.75" or about 50 to 70mm These are narrower than most found at the hardwrae store, so they fit on the narrow neck of the filter WILL NOT FIT

This is TWO (2) brand new K&N filter clamps only! This is the clamp that holds the K&N filter onto the carb The inside diameter is is 2.00" up to 2.75" or about 50 to 70mm These are narrower than most found at the hardware store, so they fit on the narrow neck of the filter (these are 5

This is a pair of (2) Banshee rubber boot clamps These are the smaller airbox boot clamps that connect the airbox to the carbs (NOT the larger ones that hold the boots to the airbox) Its ready to install on ANY year Yamaha Banshee 1987-2006 (also fits Blaster 1988-2004)

xxx This includes the 2 handlebar clamps and the 4 mounting bolt unlike the competition xxx xxx This fits modern 1 1/8"" handlebars. The stock Banshee bars were 7/8"", but this one is for 1 1/8"" handlebars, the modern style used by all sprot ATVs xxx This is a BRAND NEW Yamaha Banshee st

This is a BRAND NEW OEM factory battery holding bracket mounting clamp fits 2004 -2009 Yamaha YFZ450 and carb models 2012 & 2013 Ready to install on a 2004 2005 2006 2007 2008 2009 YFZ450 04 05 06 07 08 09 YFZ 450 This is a genuine OEM factory Yamaha part